Have you considered sanding or polishing your hardwood floor? You can distinguish between the two with the aid of this article, then choose the one that best suits your needs.

Screening And Buffing

Wood floors may be given a beautiful, lustrous shine that can endure for years by buffing away little scratches or scuffs. Buffing takes a lot of time while seeming to be cheap and straightforward. An appealing appearance results from applying a high-quality buff and coat to a hardwood floor installation Chicago.

It’s equivalent to buffing to screen. They are almost equivalent in meaning. They all relate to floor scuffing or abrasion. Before applying a layer of polyurethane, which is intended to preserve the floor and give it a gloss, the floor is first prepared by buffing and screening.

The floor is smoothed by floor screening and polishing. Additionally, it revives the light and improves the appearance of the floor.

Polishing And Sanding

Sanding is the process of using abrasive materials to remove the top surfaces of a hardwood floor. Sanding hardwood floors Chicago should only be necessary to restore major scratches or other damage to the wood or when the finish has entirely worn through in any area. Three primary steps are included in the floor sanding and polishing process:

  1. Preparation
  2. Sanding
  3. Finally, apply a protective sealer to the coating.

Feel The Distinction

Sanding and floor buffing are quite different from one another. The damaged polyurethane sealant and a portion of the wood are removed by sanding. Planks that have been sanded are refinished and sealed with fresh polyurethane.

In contrast, buffing doesn’t touch the wood and simply uses polyurethane sealant. It doesn’t contact the wood since this protective coating could be able to prevent harm.

Restoring the original appearance by buffing and sanding may raise a home’s worth. Always seek the assistance of highly qualified flooring contractors Chicago for this.

Call US!